Drive belt for Honda Dio scooters. It transmits rotation from the front variator pulley to the rear one, and as the pulley positions change it smoothly changes the transmission ratio. The size 667x18 mm is the length and width of the belt.
It is time to replace the belt if it shows cracks, scuffing, or tooth separation, slips, or causes vibration during acceleration. The belt size must be matched exactly: it is determined by the length and width.
- Before installing it, clean the variator of dust and wear debris.
- Tighten the fasteners to the standard torque and check operation at low rpm.
Manufacturer: TATA.
